SteelSeries Arctis 1 Wireless Specifications, Tests and Review

The SteelSeries Arctis 1 Wireless are wireless headphones that allow unrestricted movement and thus increase comfort while listening to music. Because of this feature wireless headphones are especially popular with casual users. On the other hand, the limiting factor of wireless headphones is a certain delay in sound transmission between the source and the headphones (almost indistinguishable for the average user), and they also need to be charged regularly. Unlike wired headphones, where the headphones are charged by the connected cable itself, wireless ones must be charged separately. The transmission range offered is up to 9 m. The maximum range represents the maximum distance from the audio transmission source that the headphones can be used for wireless audio transmission. However, the maximum communication range can be affected by obstacles such as people, walls, etc.

These headphones are designed to fit around the ears. Thanks to the design, they can isolate better from external noise than, for example, over-ear headphones. This allows for better listening quality without interference. However, this design tends to make headphones heavier and less practical for frequent carrying The weight of the headphones is 255 g.

The sound quality can be affected by many factors. For many users the frequency range is a key feature of headphones. The wider the range, the more detail and nuance you will hear while listening. However, every individual perceives frequencies differently, so the frequency range of headphones varies according to individual needs. The average person perceives frequencies in the range of 16 to 20,000 Hz, so headphones with a frequency range of 20 to 20,000 Hz are most commonly available. If you are looking for headphones with a good bass performance, you should aim for lower range values (bass represents frequencies up to about 256 Hz), while high range values (frequencies roughly above 2,048 Hz) will be better for reproducing high tones. The frequency range of headphones SteelSeries Arctis 1 Wireless is 20 - 20000 Hz. Overall, these headphones can reproduce sound up to 98 dB. However, be careful. Repeatedly playing music continuously at really high volumes can damage your hearing.

The device connected to the headphones also plays a role most times. The lower impedance value (approximately 100 to 150 Ohms) is suitable for playback from mobile phones, laptops or other portable players that do not have a powerful enough amplifier. The lower impedance will ensure that the required volume level is achieved with less power, thus extending the life of the player. However, at the same time, with lower impedance, there is more distortion of the sound. Headphones with a higher impedance of around 250 Ohms and above are then more suitable for playback from really powerful signal sources or using a headphone amplifier, otherwise the sound coming out of them might not be loud enough. At the same time, higher-impedance headphones will also ensure less distortion in the sound. In the case of these headphones, the impedance reaches the 32 Ohm value.

Headphones consist of many important parts, including the diaphragm, which is responsible for converting electrical signals into sound. The diaphragm, with a thickness of around 6 mm, is very sensitive to changes in high frequencies but less sensitive to bass. For a relatively balanced sound profile, a medium-thick diaphragm of around 10 mm is used, which can reproduce both bass and treble. A diaphragm with a thickness of around 20 mm is not as quick to respond to changes in the audio signal, and this results in poorer bass listening. However, it is very sensitive to higher frequencies. In the case of this model, the diaphragm is the 40 mm. Total Harmonic Distortion of these headphones is Audio Output | Total Harmonic Distortion. The value quoted by the manufacturer is usually the average distortion over all reproducible frequency bands. This is not a crucial parameter to decide on when making a decision, but on the other hand, keep in mind that higher harmonic distortion can negatively affect sound quality.

SteelSeries Arctis 1 Wireless has a boom–type microphone. The microphone sensitivity is -38 dBV/Pascal. A lower microphone sensitivity will generally ensure that even quieter sounds are caught. On the other hand, in noisier environments, distortion of the recording may occur. With a higher sensitivity, the microphone will not distort the recording even in noisy environments. On the other hand, the microphone will not pick up quieter sounds. So it depends on the environment and the purposes you plan to use the headphones for.

In terms of headphone battery life as a significant factor in the purchase decision, it depends on what you want to use the headphones for and potentially how often you will be able to recharge them. Headphones with up to a few hours of battery life are more suitable for home use as they will require more frequent charging. Headphones with a battery life of around 10 hours or more are already more suitable for commuting and shorter journeys. However, nowadays you can also find headphones on the market that have a battery life in the higher tens to hundreds of hours. In this case, you do not have to worry about your headphones simply running out of power on longer journeys, and you will not have to deal with constant recharging. The battery life of the SteelSeries Arctis 1 Wireless reaches up to 20 hour(s).