Philips SHP9600 Specifications, Tests and Review

Headphone type
Full size
Connectivity
Wired
Frequency Response
12 - 35000 Hz
Sensitivity
101 dB
Impedance
32 Ohm

Get the key specs, technical data, ratings and full review of Philips SHP9600 all in one place. Compare your selected model with other alternatives and give your decision on the best headphones a solid base with our comprehensive overview.

Philips SHP9600 Full Specifications and Details

design and dimensions sound quality cable connections others

DESIGN AND DIMENSIONS Philips SHP9600
Product Type Headphones - wired - 3.5 mm jack

The Philips SHP9600 are wired headphones. In the case of studio and professional DJ headphones, a wired connection is a standard and a necessity. In this case, connecting via cable reduces audio transmission delays and prevents unwanted battery drain as it would be in case of wireless headphones. The same is de facto true for gaming headsets. In case of headphones for normal music listening, the cable is rather a relic, although it still has its fans. However, the wireless option is much more popular for everyday use in today’s world.

This type of headphones has a design that surrounds the entire ear to improve isolation from external noise. As a result, they provide a great quality of listening without interference. However, unlike on-ear headphones, they are usually heavier and less suitable for frequent wearing.

Show more
SOUND QUALITY Philips SHP9600
Headphones Form Factor Full size
Ear Cups Type Open
Connectivity Technology Wired
Frequency Response 12 - 35000 Hz Better than 96 % of headphones rated.
Max Input Power 200 mW
Sensitivity 101 dB Worse than 65 % of headphones rated.
Impedance 32 Ohm
Diaphragm 50 mm Better than 96 % of headphones rated.
Magnet Material Neodymium

The sound quality can be affected by many factors. When it comes to frequency range, a wider range will allow more detail to be heard during your listening session. However, it is important to note that the ability to perceive frequencies varies from person to person. The average person is able to hear frequencies in the range of 16 to 20 000 Hz. That is why headphone manufacturers usually focus on the 20 to 20 000 Hz range. If the lower values are lower, headphones are better able to reproduce bass tones, as these represent frequencies up to approximately 256 Hz. Conversely, values from 2 048 Hz upwards are treble. Thus, headphones with a high upper limit will provide a much more accurate reproduction of high tones. Headphones Philips SHP9600 have a frequency range of 12 - 35000 Hz. The Philips SHP9600 reaches the sensitivity values of 101 dB. The sensitivity of the headphones expresses the ability of the headphones to pick up the signal from the source and reproduce it with sufficient volume. The higher the sensitivity, the more easily the signal is converted to sound and the louder the headphones are able to play at a lower power consumption. It is important to remember that high listening volume can consume more energy from connected devices. So if you want to listen to music from your cell phone, it's better to choose headphones with low sensitivity to avoid draining your phone's battery too much. Headphones with a lower sensitivity value (around 85 dB) are better suited for listening in quiet environments, while medium values (around 90 dB) allow for quality listening in noisy environments such as public transport or cafes. Headphones with a high sensitivity value (100 dB or more) are designed for use in really noisy environments such as concerts

The device connected to the headphones also plays a role most times. The lower impedance value (approximately 100 to 150 Ohms) is suitable for playback from mobile phones, laptops or other portable players that do not have a powerful enough amplifier. The lower impedance will ensure that the required volume level is achieved with less power, thus extending the life of the player. However, at the same time, with lower impedance, there is more distortion of the sound. Headphones with a higher impedance of around 250 Ohms and above are then more suitable for playback from really powerful signal sources or using a headphone amplifier, otherwise the sound coming out of them might not be loud enough. At the same time, higher-impedance headphones will also ensure less distortion in the sound. In the case of these headphones, the impedance reaches the 32 Ohm value. The maximum input power of these headphones indicates how many decibels they can receive from the device without any damage. For Philips SHP9600, it is 200 mW.

The headphones are composed of many various components, one of the most important is the diaphragm. Diaphragm transforms the electrical signal into sound and therefore its quality affects the overall listening experience. There are three types of diaphragms: thin, medium-thick, and thicker. A thin 6 mm thick diaphragm responds quickly to high frequencies but less sensitively to bass. The medium-thick 10 mm diaphragm provides a balanced sound profile, allowing you to enjoy both bass and treble. The thicker 20 mm diaphragm is more sensitive to higher frequencies but has a poorer bass response. These headphones are equipped with the 50 mm.

The design of the headphones and their earcups can also affect the quality of the audio output. The open design ensures better sound reproduction with less distortion. On the other hand, it lets ambient noise in, but also lets sound from the headphones out. Therefore, choose the open design for home use or in quiet environments.

Show more
CABLE Philips SHP9600
Cable Type Headphones cable - detachable - 3 m
Detachable Cable Yes
Plated Connector Gold
CONNECTIONS Philips SHP9600
Connector Type Headphones (mini-phone stereo 3.5 mm)
OTHERS Philips SHP9600
Included Accessories 3.5 mm to 6.3 mm adapter

Similar Headphones

Other Philips Headphones

Other projects: