Philips SHL5002 Specifications, Tests and Review

Headphone type
On-ear
Connectivity
Wired
Frequency Response
10 - 28000 Hz
Sensitivity
106 dB
Impedance
32 Ohm

A detailed list of technical data, specifications, ratings and expert review of Philips SHL5002. Get a comprehensive look at your chosen headphones and see if these are the ones that will best suit your needs. You can also use the comparison feature to compare with other competing headphones.

Philips SHL5002 Full Specifications and Details

design and dimensions sound quality cable connections

DESIGN AND DIMENSIONS Philips SHL5002
Product Type Headphones - wired - 3.5 mm jack
Recommended Use Portable electronics

The Philips SHL5002 are wired headphones. In the case of studio and professional DJ headphones, a wired connection is a standard and a necessity. In this case, connecting via cable reduces audio transmission delays and prevents unwanted battery drain as it would be in case of wireless headphones. The same is de facto true for gaming headsets. In case of headphones for normal music listening, the cable is rather a relic, although it still has its fans. However, the wireless option is much more popular for everyday use in today’s world.

The headphones are designed as on-ear. On-ear headphones are generally lighter. However, their design has fewer isolation capabilities, and therefore, for example, more sound can be let in and out compared to around-ear headphones.

Show more
SOUND QUALITY Philips SHL5002
Headphones Form Factor On-ear
Headphones Technology Dynamic
Connectivity Technology Wired
Noise Isolating Yes Better than 95 % of headphones rated.
Sound Output Mode Stereo
Frequency Response 10 - 28000 Hz Better than 94 % of headphones rated.
Sensitivity 106 dB Better than 65 % of headphones rated.
Impedance 32 Ohm
Diaphragm Mylar - 30 mm Worse than 78 % of headphones rated.
Magnet Material Neodymium

The sound quality can be affected by many factors. For many users the frequency range is a key feature of headphones. The wider the range, the more detail and nuance you will hear while listening. However, every individual perceives frequencies differently, so the frequency range of headphones varies according to individual needs. The average person perceives frequencies in the range of 16 to 20,000 Hz, so headphones with a frequency range of 20 to 20,000 Hz are most commonly available. If you are looking for headphones with a good bass performance, you should aim for lower range values (bass represents frequencies up to about 256 Hz), while high range values (frequencies roughly above 2,048 Hz) will be better for reproducing high tones. The frequency range of headphones Philips SHL5002 is 10 - 28000 Hz. The headphone's sensitivity determines how effectively they can receive a signal from a source. The higher the sensitivity of the headphones, the louder they can play at lower power consumption. However, at high volumes, power consumption increases, which can be a problem when listening to music from a cell phone. A sensitivity value of around 85 dB is suitable for quiet environments, while a value of around 90 dB allows for quality listening even in noisy environments. Headphones with a sensitivity value of 100 dB and above are suitable for extremely noisy environments such as concerts. Headphones Philips SHL5002 are designed with sensitivity about 106 dB.

The device connected to the headphones also plays a role most times. The lower impedance value (approximately 100 to 150 Ohms) is suitable for playback from mobile phones, laptops or other portable players that do not have a powerful enough amplifier. The lower impedance will ensure that the required volume level is achieved with less power, thus extending the life of the player. However, at the same time, with lower impedance, there is more distortion of the sound. Headphones with a higher impedance of around 250 Ohms and above are then more suitable for playback from really powerful signal sources or using a headphone amplifier, otherwise the sound coming out of them might not be loud enough. At the same time, higher-impedance headphones will also ensure less distortion in the sound. In the case of these headphones, the impedance reaches the 32 Ohm value.

Headphones consist of many important parts, including the diaphragm, which is responsible for converting electrical signals into sound. The diaphragm, with a thickness of around 6 mm, is very sensitive to changes in high frequencies but less sensitive to bass. For a relatively balanced sound profile, a medium-thick diaphragm of around 10 mm is used, which can reproduce both bass and treble. A diaphragm with a thickness of around 20 mm is not as quick to respond to changes in the audio signal, and this results in poorer bass listening. However, it is very sensitive to higher frequencies. In the case of this model, the diaphragm is the Mylar - 30 mm.

You will also definitely appreciate the special design of the construction that creates a seal that further blocks out ambient noise and which contributes to undisturbed music listening.

Show more
CABLE Philips SHL5002
Cable Type Headphones cable - 1.2 m
CONNECTIONS Philips SHL5002
Connector Type Headphones (mini-phone stereo 3.5 mm)

Similar Headphones

Other Philips Headphones

Other projects: