Philips SHE2860 Specifications, Tests and Review

Headphone type
Ear-bud
Connectivity
Wired
Frequency Response
12 - 22000 Hz
Sensitivity
103 dB
Impedance
16 Ohm

A detailed list of technical data, specifications, ratings and expert review of Philips SHE2860. Get a comprehensive look at your chosen headphones and see if these are the ones that will best suit your needs. You can also use the comparison feature to compare with other competing headphones.

Philips SHE2860 Full Specifications and Details

design and dimensions sound quality cable connections others

DESIGN AND DIMENSIONS Philips SHE2860
Product Type Headphones - wired - 3.5 mm jack
Recommended Use Portable electronics

The Philips SHE2860 are wired headphones. In the case of studio and professional DJ headphones, a wired connection is a standard and a necessity. In this case, connecting via cable reduces audio transmission delays and prevents unwanted battery drain as it would be in case of wireless headphones. The same is de facto true for gaming headsets. In case of headphones for normal music listening, the cable is rather a relic, although it still has its fans. However, the wireless option is much more popular for everyday use in today’s world.

These headphones are in-ear type and are therefore designed to fit directly into the ear. This allows them complete or at least partial isolation from external noise. Such headphones may also have an ambient sound isolation function, which affects the degree of their isolation capabilities. Compared to over-the-head headphones, in-ear headphones are much more portable

Show more
SOUND QUALITY Philips SHE2860
Headphones Form Factor Ear-bud
Headphones Technology Dynamic
Connectivity Technology Wired
Sound Output Mode Stereo
Frequency Response 12 - 22000 Hz Better than 73 % of in-ear headphones rated.
Sensitivity 103 dB Worse than 52 % of in-ear headphones rated.
Impedance 16 Ohm
Diaphragm Mylar - 15 mm Better than 95 % of in-ear headphones rated.
Magnet Material Neodymium

The sound quality can be affected by many factors. For many users the frequency range is a key feature of headphones. The wider the range, the more detail and nuance you will hear while listening. However, every individual perceives frequencies differently, so the frequency range of headphones varies according to individual needs. The average person perceives frequencies in the range of 16 to 20,000 Hz, so headphones with a frequency range of 20 to 20,000 Hz are most commonly available. If you are looking for headphones with a good bass performance, you should aim for lower range values (bass represents frequencies up to about 256 Hz), while high range values (frequencies roughly above 2,048 Hz) will be better for reproducing high tones. The frequency range of headphones Philips SHE2860 is 12 - 22000 Hz. The headphone's sensitivity determines how effectively they can receive a signal from a source. The higher the sensitivity of the headphones, the louder they can play at lower power consumption. However, at high volumes, power consumption increases, which can be a problem when listening to music from a cell phone. A sensitivity value of around 85 dB is suitable for quiet environments, while a value of around 90 dB allows for quality listening even in noisy environments. Headphones with a sensitivity value of 100 dB and above are suitable for extremely noisy environments such as concerts. Headphones Philips SHE2860 are designed with sensitivity about 103 dB.

The device connected to the headphones also plays a role most times. The lower impedance value (approximately 100 to 150 Ohms) is suitable for playback from mobile phones, laptops or other portable players that do not have a powerful enough amplifier. The lower impedance will ensure that the required volume level is achieved with less power, thus extending the life of the player. However, at the same time, with lower impedance, there is more distortion of the sound. Headphones with a higher impedance of around 250 Ohms and above are then more suitable for playback from really powerful signal sources or using a headphone amplifier, otherwise the sound coming out of them might not be loud enough. At the same time, higher-impedance headphones will also ensure less distortion in the sound. In the case of these headphones, the impedance reaches the 16 Ohm value.

Headphones consist of many important parts, including the diaphragm, which is responsible for converting electrical signals into sound. The diaphragm, with a thickness of around 6 mm, is very sensitive to changes in high frequencies but less sensitive to bass. For a relatively balanced sound profile, a medium-thick diaphragm of around 10 mm is used, which can reproduce both bass and treble. A diaphragm with a thickness of around 20 mm is not as quick to respond to changes in the audio signal, and this results in poorer bass listening. However, it is very sensitive to higher frequencies. In the case of this model, the diaphragm is the Mylar - 15 mm.

Show more
CABLE Philips SHE2860
Cable Type Headphones cable - 1 m
Plated Connector Nickel
CONNECTIONS Philips SHE2860
Connector Type Headphones (mini-phone stereo 3.5 mm)
OTHERS Philips SHE2860
Included Accessories Carrying case

Similar Headphones

Other Philips Headphones

Other projects: