Philips SBC HP200 Specifications, Tests and Review

Headphone type
Full size
Connectivity
Wired
Frequency Response
15 - 22000 Hz
Sensitivity
100 dB
Impedance
32 Ohm

Complete technical specifications, details, expert ratings and review of Philips SBC HP200. Find out how your chosen headphones stack up against the competition and whether they are the ones that best meet your expectations with the headphone comparison feature.

Philips SBC HP200 Full Specifications and Details

design and dimensions sound quality cable connections others

DESIGN AND DIMENSIONS Philips SBC HP200
Product Type Headphones - wired - 3.5 mm jack
Body Material ABS plastic

The Philips SBC HP200 are wired headphones. In the case of studio and professional DJ headphones, a wired connection is a standard and a necessity. In this case, connecting via cable reduces audio transmission delays and prevents unwanted battery drain as it would be in case of wireless headphones. The same is de facto true for gaming headsets. In case of headphones for normal music listening, the cable is rather a relic, although it still has its fans. However, the wireless option is much more popular for everyday use in today’s world.

The design of the headphones is around the ears. Because of this design, the headphone envelops the entire ear and isolates the ear better from surrounding noise when listening compared to for example on-ear headphones. With that, they offer high-quality listening without interference. However, they are most likely heavier by design and less practical for frequent carrying.

Show more
SOUND QUALITY Philips SBC HP200
Headphones Form Factor Full size
Headphones Technology Dynamic
Connectivity Technology Wired
Sound Output Mode Stereo
Frequency Response 15 - 22000 Hz Better than 76 % of headphones rated.
Sensitivity 100 dB Worse than 70 % of headphones rated.
Impedance 32 Ohm
Diaphragm Mylar - 40 mm Better than 78 % of headphones rated.
Magnet Material Ferrite

The sound quality can be affected by many factors. When it comes to frequency range, the wider it is, the more detail you will hear when listening. However, the range a person can perceive is highly individual. The average person is able to perceive frequencies in the range of 16 to 20 000 Hz. So the most common frequency range you will see on the market is 20 to 20,000 Hz. Lower frequencies up to approximately 256 Hz are considered bass frequencies. Therefore, the lower the bottom value is, the better the headphones will reproduce bass. Conversely, values from approximately 2 048 Hz upwards are treble. That is why headphones with a high upper value will provide a much more accurate reproduction of high notes. Philips SBC HP200 offers a frequency range of 15 - 22000 Hz. The sensitivity parameter determines how sensitively the headphones can receive the signal from the source. The higher the sensitivity value, the louder the headphones will be able to play with less power consumption. In general, a higher listening volume also means a higher power load for the connected device. So if you're buying headphones to listen to music from your mobile phone, for example, this is relevant to think about as you don't want to drain your phone's battery too much. Lower values around 85 dB are more suitable for listening in more quiet environments (for example, at home or in the office). Medium values of around 90 dB can provide good listening quality in noisier environments (for example, on public transport or in cafés). Headphones with high sensitivity values of around 100 dB or more are designed for really noisy environments, such as concerts. The Philips SBC HP200 has 100 dB.

The device connected to the headphones also plays a role most times. The lower impedance value (approximately 100 to 150 Ohms) is suitable for playback from mobile phones, laptops or other portable players that do not have a powerful enough amplifier. The lower impedance will ensure that the required volume level is achieved with less power, thus extending the life of the player. However, at the same time, with lower impedance, there is more distortion of the sound. Headphones with a higher impedance of around 250 Ohms and above are then more suitable for playback from really powerful signal sources or using a headphone amplifier, otherwise the sound coming out of them might not be loud enough. At the same time, higher-impedance headphones will also ensure less distortion in the sound. In the case of these headphones, the impedance reaches the 32 Ohm value.

An important part of these headphones is the diaphragm, which, simply put, converts the electrical signal into a sound. The thin diaphragm that is around 6 mm thick can react quickly to changes in the audio signal and improves high-frequency listening. However, it is less sensitive to bass. The medium-thick diaphragm of around 10 mm provides a fairly balanced sound profile, allowing you to enjoy both bass and treble. A thicker diaphragm of around 20 mm cannot react so quickly to changes in the sound signal, thus impairing bass listening. However, it is more sensitive to higher frequencies. This model features the Mylar - 40 mm.

Show more
CABLE Philips SBC HP200
Cable Type Headphones cable - 2 m
CONNECTIONS Philips SBC HP200
Connector Type Headphones (mini-phone stereo 3.5 mm)
OTHERS Philips SBC HP200
Included Accessories 6.3 mm (1/4") stereo adapter

Similar Headphones

Other Philips Headphones

Other projects: