Cisco Headset 730 Specifications, Tests and Review

The wireless headphones Cisco Headset 730 allow unrestricted movement, which increases the comfort of using the headphones. This feature is particularly popular with headphones for casual use. However, a certain limiting factor of wireless headphones compared to wired ones is a certain delay in sound transmission between the source and the headphones (but almost indistinguishable for the average user) and the need for regular charging. Unlike wired headphones, wireless headphones are charged separately. The headphones use the Bluetooth 5.0 technology for sound transmission. The transmission range offered is up to 65 m. The maximum range represents the maximum distance from the audio transmission source that the headphones can be used for wireless audio transmission. However, the maximum communication range can be affected by obstacles such as people, walls, etc.

The headphones are designed as on-ear. On-ear headphones are generally lighter. However, their design has fewer isolation capabilities, and therefore, for example, more sound can be let in and out compared to around-ear headphones.

The sound quality can be affected by many factors. When it comes to frequency range, a wider range will allow more detail to be heard during your listening session. However, it is important to note that the ability to perceive frequencies varies from person to person. The average person is able to hear frequencies in the range of 16 to 20 000 Hz. That is why headphone manufacturers usually focus on the 20 to 20 000 Hz range. If the lower values are lower, headphones are better able to reproduce bass tones, as these represent frequencies up to approximately 256 Hz. Conversely, values from 2 048 Hz upwards are treble. Thus, headphones with a high upper limit will provide a much more accurate reproduction of high tones. Headphones Cisco Headset 730 have a frequency range of 20 - 20000 Hz. Overall, these headphones can reproduce sound up to 118 dB. However, be careful. Repeatedly playing music continuously at really high volumes can damage your hearing. To control the optimum playback volume you can use the manual control directly on the cable.

The device connected to the headphones also plays a role most times. The lower impedance value (approximately 100 to 150 Ohms) is suitable for playback from mobile phones, laptops or other portable players that do not have a powerful enough amplifier. The lower impedance will ensure that the required volume level is achieved with less power, thus extending the life of the player. However, at the same time, with lower impedance, there is more distortion of the sound. Headphones with a higher impedance of around 250 Ohms and above are then more suitable for playback from really powerful signal sources or using a headphone amplifier, otherwise the sound coming out of them might not be loud enough. At the same time, higher-impedance headphones will also ensure less distortion in the sound. In the case of these headphones, the impedance reaches the 32 Ohm value.

The headphones are composed of many various components, one of the most important is the diaphragm. Diaphragm transforms the electrical signal into sound and therefore its quality affects the overall listening experience. There are three types of diaphragms: thin, medium-thick, and thicker. A thin 6 mm thick diaphragm responds quickly to high frequencies but less sensitively to bass. The medium-thick 10 mm diaphragm provides a balanced sound profile, allowing you to enjoy both bass and treble. The thicker 20 mm diaphragm is more sensitive to higher frequencies but has a poorer bass response. These headphones are equipped with the 40 mm.

For an even more undisturbed listening experience, the headphones have a special Active Noise Canceling feature.

A nice benefit of the microphone of the Headphones Cisco Headset 730 is the Noise Canceling technology that suppresses ambient noise and allows a clearer sound recording to be captured.

These headphones allow simultaneous connection up to 2 devices. This feature allows you to easily switch between listening from your mobile, tablet, or computer without having to switch manually. Demanding users and technology enthusiasts will appreciate an intelligent assistant with whom they can partially control connected devices. For example, they can adjust the volume or request information about messages or alerts.

In terms of headphone battery life as a significant factor in the purchase decision, it depends on what you want to use the headphones for and potentially how often you will be able to recharge them. Headphones with up to a few hours of battery life are more suitable for home use as they will require more frequent charging. Headphones with a battery life of around 10 hours or more are already more suitable for commuting and shorter journeys. However, nowadays you can also find headphones on the market that have a battery life in the higher tens to hundreds of hours. In this case, you do not have to worry about your headphones simply running out of power on longer journeys, and you will not have to deal with constant recharging. The battery life of the Cisco Headset 730 reaches up to 25 hour(s).

Charging time is 2.5 hour(s).