Side by side comparison and review of Philips TAT8506WT and Xiaomi Buds 3T Pro. Compare design, sound quality and other key specifications and features to simplify the choice of your perfect headphones. Our goal is to make it easier for you to decide on the headphones that will best meet your expectations by revealing the main differences between the products.
| DESIGN AND DIMENSIONS | Philips TAT8506WT | Xiaomi Buds 3T Pro |
|---|
| Product Type | True wireless earphones - Bluetooth - wireless | True wireless earphones - Bluetooth - wireless | |
|---|---|---|---|
| Weight | - | 4.9 g | |
| Dimensions & Weight Details | - | Earphone: 4.9 g Charging case with earphones: 48 g |
|
| Colour | White | White lacquer | Carbon black | |
| Protection | IPX4 | Dust-resistant, water-resistant | |
| Recommended Use | - | Portable electronics | |
| Bluetooth Range (Operating Distance) | 10 m | 10 m | The maximum operating distance of both headphones is the same. |
| High-Resolution Audio | Yes | Yes |
| SOUND QUALITY | Philips TAT8506WT | Xiaomi Buds 3T Pro |
|---|
| Headphones Form Factor | In-ear | In-ear | |
|---|---|---|---|
| Headphones Technology | Dynamic | Dynamic | |
| Connectivity Technology | Wireless | Wireless | |
| Wireless Technology | Bluetooth | Bluetooth | |
| Bluetooth Version | Bluetooth 5.2 | Bluetooth 5.2 | Both headphones have the same Bluetooth version. |
| Bluetooth Profiles | Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio/Video Remote Control Profile (AVRCP) | Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio/Video Remote Control Profile (AVRCP) | |
| Bluetooth Audio Codec | SBC, AAC, LDAC | LHDC 4.0 | |
| Active Noise Cancelling | Yes | Yes | Both headphones are equipped with active noice cancellation. |
| Active Noise Cancelling Technology | Noise Canceling Pro+ | - | |
| Sound Output Mode | - | Hi-Fi stereo | |
| Sound Effects | - | Dual transparency mode, Dimensional audio technology | |
| Frequency Response | 7 - 40000 Hz | - | |
| Max Input Power | 5 mW | - | |
| Total Harmonic Distortion (THD) | - | <0.08% | |
| Sensitivity | 104 dB | - | |
| Impedance | 16 Ohm | 32 Ohm | |
| Diaphragm | 13 mm | Diamond-like carbon (DLC) | |
| Magnet Material | - | Neodymium | |
| Features | - | CCAW coil, HRTF professional tuning |
| MICROPHONE | Philips TAT8506WT | Xiaomi Buds 3T Pro |
|---|
| Form Factor | Built-in | Built-in | |
|---|---|---|---|
| Noise Cancelling | - | Yes | Xiaomi Buds 3T Pro microphone can cancel out ambient noise. |
| Microphones Included | 3 | 3 | Both headphones have a built-in microphone. |
| REMOTE CONTROL | Philips TAT8506WT | Xiaomi Buds 3T Pro |
|---|
| Controls | - | Pinch control |
|---|
| CABLE | Philips TAT8506WT | Xiaomi Buds 3T Pro |
|---|
| Cable Type | - | USB-C charge cable - detachable |
|---|
| FEATURES | Philips TAT8506WT | Xiaomi Buds 3T Pro |
|---|
| Features | Multipoint Pairing | Up to 24 bit / 96 kHz audio | |
|---|---|---|---|
| Internet of Things (IoT) Compatible | Yes | - | |
| Voice Control | Indirect | - | |
| Intelligent Assistant | Google Assistant ready, Siri ready | - | |
| Sensors | - | Force sensor |
| BATTERY AND CHARGING | Philips TAT8506WT | Xiaomi Buds 3T Pro |
|---|
| Battery Type | Headphone battery rechargeable - lithium polymer - - wireless charging | Headphone battery rechargeable - wireless charging | |
|---|---|---|---|
| Battery Capacity | 50 mAh | 38 mAh | Philips TAT8506WT have a higher battery capacity than Xiaomi Buds 3T Pro. |
| Battery Life | 9 hour(s) | - | |
| Battery Life Details | Continuous playback (noise cancelling OFF): up to 9 hours Continuous playback (noise cancelling ON): up to 8 hours Continuous playback (noise cancelling OFF / with included charging case): up to 36 hours Continuous playback (noise cancelling ON / with included charging case): up to 32 hours |
Continuous playback: up to 6 hours Continuous playback (with included charging case): up to 24 hours |
|
| Wireless Charging Standards | - | Qi | |
| Charging Time | 2 hour(s) | - |
| CONNECTIONS | Philips TAT8506WT | Xiaomi Buds 3T Pro |
|---|
| Connector Type | USB (power only) (USB Type-C) | USB (power only) (USB Type-C) |
|---|
| OTHERS | Philips TAT8506WT | Xiaomi Buds 3T Pro |
|---|
| Included Accessories | Pair of Comply foam ear tips, 6 pairs of ear tips, USB-C charging cable, charging case (410 mAh) | 3 pairs of silicone ear tips (small, medium, large), charging case (480 mAh) | |
|---|---|---|---|
| Compliant Standards | - | IP55 | |
| Service & Support | - | Limited warranty - parts and labour - 2 years |
cs
sk
de
it
es
fr
hu
pt
ru
pl
br
ro
